Using The Dtmf Memory; Entering A Dtmf Code - Icom i2730A Instruction Manual

■ Using the DTMF Memory

The transceiver can store up to 16 Memory channels of
24-digit DTMF codes.
• "E" stands for "M" and "F" stands for "#" on the display.
D Entering a DTMF code
Hold down [LOW DTMF] C for 1 second.
q
• Enters the DTMF Menu mode.
w Rotate [DIAL]S to select "MEMORY" (DTMF Memory).
Push [ ï]D.
e
• Displays the DTMF Memory Selection screen.
r Rotate [DIAL]S to select a desired DTMF memory.
Push [ ï]D.
t
• Enters the DTMF Memory Entry mode.
Blinks
y
u
i
o
DTMF memory
!0
OTHER FUNCTIONS
Rotate [DIAL] to select a desired number to enter a
S
code.
Push [ Ω]D to move the cursor backwards, or push [≈]D
to move the cursor forwards.
• Push [CLR]D to delete the selected code and all codes that are
located to the right of the cursor.
• When the cursor is located to the right edge, the code to the left
of the cursor is deleted.
• Hold down [CLR]D for 1 second to delete all the code.
Repeat steps y and u to enter a desired DTMF code.
ï]D.
After entering, push [
• Beeps sound.
• Saves the channel, and returns to the DTMF memory selection
screen.
Push [MAIN BAND]S.
• Exits the DTMF Menu mode.
D isplay
S ide C enter S ide
8
Blinks
The C, S, or D in the
instructions indicate the
area of the controller.
C: Center
S: Side
D: Display
8
54