Table of Contents
Advertisement
2
MENU MODE
Setting items
■
D
EXMENU mode
Function items (Continued)
PTT lock
Turns the PTT Lock function ON or OFF.
To prevent accidental transmissions, this function disables [PTT].
Busy lockout
Turns the Busy Lockout function ON or OFF.
This function inhibits transmission while receiving a signal, or
when the squelch is open.
Time-out timer
Sets the Time-out timer to prevent an accidental prolonged trans-
mission.
Active band
Allows continuous frequency selection across all bands by rotat-
ing [DIAL].
MIC gain
Sets the microphone sensitivity to suit your preference.
Auto power OFF
Sets to automatically turn OFF the transceiver after a preset time
period of inactivity.
CI-V
See the Icom website for details of the CI-V command.
CI-V address
Sets the transceiver's unique CI-V hexadecimal address code.
CI-V baud rate
Sets the CI-V data transfer speed.
15
CI-V transceive
Turns the CI-V Transceive function ON or OFF.
IF exchange
Sets to exchange the Intermediate Frequency between left and
right bands to avoid interference.
Display items
Sets the Display options.
Backlight*
Sets the backlight brightness level.
Auto dimmer
Sets the Auto dimmer function, and the dimmer level.
Auto dimmer timer
Sets the auto dimmer time period.
LCD contrast
Sets the contrast level of the LCD.
Opening message
Sets whether or not to display "ICOM" and the power source volt-
age at power ON.
Memory name
Sets to display either the operating frequency or the channel name
in the Memory mode.
AIR band display
Sets the AIR band display type between Frequency and ID.
This item may not be displayed, depending on the transceiver's
version.
*You can set in the MENU mode.
Advertisement
Table of Contents
