Setting A Temporary Operating Frequency - Icom IC-M804 Instruction Manual

■ Setting a temporary operating frequency

You can temporarily change the operating frequency
of the selected channel. The frequency returns to the
preset value after you select another channel, or turn
OFF the transceiver.
1. Select a channel that is near the frequency you
want to receive.
2. Push [RX/TX] to select the RX mode.
• The RX icon lights blue.
3. Enter a receive frequency.
TIP:
• Select the digit using [◄] and [►], and change
the value using [▲] and [▼], or rotating
[CH/GRP].
• When you select the digit using [◄] and [►],
is displayed above the selected digit.
• You can directly enter a frequency by using
the Keypad keys.
NOTE:
• If you enter a frequency that is out of the
frequency range, an error beep sounds, and
the channel automatically returns to the preset
frequency.
• If you enter a frequency using the Keypad
keys and 10 seconds have passed without
pressing [ENT], the channel automatically
returns to the preset frequency.
• BE SURE to push [ENT] after entering the
frequency by using the Keypad keys.
Example: Entering 6520.0 kHz
[6] → [5] → [2] → [0] → [0] → [ENT]
4. Push [RX/TX] to select the TX mode.
• The TX icon lights blue.
OTHER FUNCTIONS AND OPERATIONS
5. Enter a transmit frequency by using the Keypad
keys.
L See the NOTE in step 3 to enter.
6. Push [RX/TX].
TIP:
• If you want to save the entered frequency:
1. Push
CH Save
entered.
• "Are You Sure?" is displayed.
2. Push .
OK
• The setting is saved and returns to the
previous screen.
3. Push [RX/TX] or [CLR].
• If you want to change and save the frequency
and other settings of the selected channel, push
to open the Channel Edit screen.
CH Edit
See the next page for details.
• Push to change the operating mode to
Mode
J3E, H3E, LSB, J2B, F1B, or A1A.
Push
after the frequency is
5
5
16