Memory Names - Icom IC-A110 Instruction Manual

4
MEMORY PROGRAMMING

■ Memory names

ï Programming memory names
q Select the memory channel to be programmed:
➥ Push [V/M] to select the Memory mode.
➥ Rotate [DIAL] to select the memory channel.
w Hold down [MW](V/M) for 5 seconds to enter memory
name writing mode.
• The first digit blinks.
e Repeatedly rotate [DIAL] to select the desired character.
• To erase a character, overwrite with a space (displayed as _).
• To move the cursor forwards or backwards, push [Y] or [Z].
• Hold down [SQL] for 2 seconds to erase all characters.
[EXAMPLE]: Setting the name to "TOWER 2"
9
for 5 seconds
V/M
r Hold down [MW](V/M) for 1 second to input the entered
name.
• The character stops blinking.
• Memory channels can be programmed with names of up to 7
characters in length.
• When no name is programmed, the display shows the operating
frequency.
NOTE: Push [PTT] to cancel the memory name programming.
• The following characters can be used in names:
➥ 0 to 9, A to Z (capitals), (space), $, %, ', (, ), ✽, +, " ,
", –, /, <, =, >, ?, @, [, \, ], ^, _ and `.
+
or for 1 second
V/M