Memory Names; Memory Clearing - Icom IC-7850 Instruction Manual

11
MEMORY OPERATION

■ Memory names

All memory channels (including scan edges) can be
assigned alphanumeric names of up to 10 characters.
Upper case letters, lower case letters, numerals, some
symbols and spaces can be used.
D Editing (programming) memory names
 The Multi-function screens are OFF:
Push [MEMORY](F).
q
• The Memory list screen is displayed.
Select the desired memory channel.
w
Push [NAME](F) to edit the memory channel name.
e
• A cursor appears and blinks.
• Memory channel names of blank channels cannot be
edited.
Edit the desired character by rotating [MAIN DIAL]
r
or by pushing keypad for number input.
• Push [ABC]() or [abc]() to toggle between upper case
and lower case letters.
• Push [123]() or [Symbol]() to toggle between numbers
and symbols.
• Push [t](F) or [u](F) to move the cursor.
• Push [DEL](F) to delete the selected character.
• Push [SPACE](F) to enter a space.
• Pushing keypad, [0]–[9], can also enter numbers.
Push [EXIT/SET] to save the name.
t
• The cursor disappears.
Repeat steps w to t to program another memory
y
channel's name, if desired.
Push [EXIT/SET].
u
• Exits the Memory list screen.

■ Memory clearing

Any unnecessary memory channels can be cleared. The
cleared memory channels become blank channels.
Select the memory mode by pushing [V/M].
q
w Push [MEMORY](F).
• The Memory list screen is displayed.
Select the desired memory channel by pushing
e
M-CH .
[Y] or [Z]
Hold down [CLR](F) for 1 second to clear the con-
r
tents.
• The frequency and operating mode disappear.
To clear other memory channels, repeat steps
t
and r.
(�) Multi-function keys
(F) Function keys
• Enters the memory name
A B C D E F G H I J K L M N O P Q R S T
U V W X Y Z
a b c d e f g h i j k l m n o p q r s t u v w x
y z
1 2 3 4 5 6 7 8 9 0
! # $ % & \ ? " ' ` ^ + – ✱ / . , : ; = < > ( ) [ ] {
~
} | _
(F) Function keys
Memory clearing
•
e
11-6
M-CH [�] or [�] [V/M]
[EXIT/SET] [MAIN DIAL]
@
[V/M]
[EXIT/SET] [MAIN DIAL]