Memory Names - Icom iC-A14 Instruction Manual

4
MEMORY OPERATION
■

Memory names

The memory channel can display an 8-character name in-
stead of the programmed frequency.
D Programming memory names
q Set the desired frequency in the frequency mode. (p. 8)
w Enter the select memory write mode.
• For the IC-A14; push [FUNC] then push [MW](MR).
• For the IC-A14S; hold down [MR] for 1 second.
e Select the desired memory channel to be programmed by
pushing [Y]/[Z]
keypad then [ENT])
r Push [MR] momentarily to enter the memory name pro-
gramming mode.
• "-- -- -- -- -- -- -- --" appears and 1st digits blink.
• Available characters
KEY CHARACTER
[1] 1, Q, Z
[2] 2, A, B, C
[3] 3, D, E, F
[4] 4, G, H, I
[5] 5, J, K, L
15
(or on only the IC-A14, push the keys on the
.
KEY CHARACTER
[6] 6, M, N, O,
[7] 7, P, R, S
[8] 8, T, U, V
[9] 9, W, X, Y
[0] 0, _ (space), –
For the IC-A14
t Push the appropriate digit key several times to select the
desired character, as shown to the left.
• To move the cursor forwards or backwards, use [Y]/[Z].
• The cursor automatically moves forward when a different key is
pushed.
• To erase a character, overwrite with a space (displayed as
"_").
y Push [ENT] to program the name and frequency at the
same time.
• Return to the frequency display.
• If no name is programmed, the programmed frequency is dis-
played.
• To clear the entered memory names, push [CLR] before push-
ing [ENT].
For the IC-A14S
t Push [Y]/[Z] several times to select the desired character.
• To move the cursor forwards, use [MR].
• To erase a character, overwrite with a space (displayed as
"_").
y Hold down [MR] for 1 second to program the name and
frequency at the same time.
• Return to the frequency display.
• If no name is programmed, the programmed frequency is dis-
played.
• To clear the entered memory names, push [CLR] before hold-
ing down [MR] for 1 second.