Memory Scan And Select Memory Scan (Memory Mode); D Memory Scan Operation - Icom IC-7300 HF Plus Full Manual

Previous view
10
SCANS

Memory scan and Select Memory scan (Memory mode)

Memory scan
Ch 2
#2
Ch 1 *"#1," "#2" and "#3" show that the channel
is specified as a select memory.
#1
Ch 99
#1
Repeatedly scans all entered Memory channels.
Blank (not entered) Memory channels are skipped.
L If two or more Memory channels are not entered,
the Memory scan does not start.

D Memory scan operation

1. Push to select the Memory mode.
V/M
2. Open the SCAN screen.
» SCAN
MENU
3. Touch [MEMO] to start the Memory scan.
[SEL No.] is displayed instead of [∂F SPAN].
While Memory scanning
L "MEMO SCAN" and decimal points blink while
scanning.
L [SEL No.] is displayed instead of [∂F] while scanning.
4. Touch [MEMO] to cancel the scan.
5. To close the SCAN screen, push
Blank channel
Ch 3
Ch 4
#1
Ch 5
#1
Ch 7 Ch 6
#1 #3
Blinks
Blinks
.
EXIT
Select Memory scan
Ch 2
#2
Ch 1 *"#1," "#2" and "#3" show that the channel
is specified as a select memory.
#1
Ch 99
#1
Repeatedly scans all or one of 3 Select Memory
channels (★1, ★2, ★3).
L If two or more Memory channels are not
designated as a Select Memory channels, the
Select Memory scan does not start.
10-4
Blank channel
Ch 3
Ch 4
#1
Ch 5
#1
Ch 7 Ch 6
#1 #3