Config. Control Menu - Printronix P8000 Plus Series Administrator's Manual

CONFIG. CONTROL Menu

The CONFIG. CONTROL menu allows you to control your printer's configurations according to the
specifications necessary for your print jobs.
CONFIG.
CONTROL
(from page 57,
58, 59, 60, 61,
62, 63, 64)
Load Config.
Factory* Cfg 1*
Cfg 1 – Cfg 8
Cfg 2- Cfg 8
Name
Configs
Cfg 1*
(see Example 2
Cfg 2- Cfg 8
on page 51)
All
Load Config.
The printer can store numerous configurations in memory. This parameter allows you to select and load a
specific configuration.
Save Config.
This option allows you to save up to eight configurations to meet different print job requirements. This
eliminates the need to change the parameter settings for each new job. The configurations are stored in
memory and will not be lost if you turn off the printer. If the Protect Configs. parameter is enabled, the
new configuration will not be saved unless the existing configuration has been deleted first. The factory
default configuration cannot be changed. See Saving Your New Configuration on page 48 for details.
Print Config.
This option is used to print a listing of various stored printer configurations. Store printouts of your
configurations in a safe place for quick referral.
Delete Config.
You can delete one or all of your eight customized configurations. The factory default configuration
cannot be deleted.
Save Config. Print Config.
Current Short*
Current Full
Factory
Power-Up
All
Cfg 1- Cfg 8
Reset Cfg
Auto Save
Names
Enable*
Disable
*= Factory Default
Delete Power-Up
Config. Config.
All* Factory*
Cfg 1- Cfg 8 Cfg 1- Cfg 8
Protect
Configs.
Disable*
Enable
75