Menus [Nc60] - Xerox DocuPrint C55 Service Manual

MENUS [NC60 ONLY]
PROCEDURE
NOTE: Before entering the NC60 Menus,
ensure that the printer has completed the
initialization cycle and the On Line LED is on.
Press the MENU UP or MENU DOWN key.
You are now in the menus
Navigating through the Menus.
Menu up or Menu Down
Scrolls through the Menus.
Item Up or Item Down
Enters the Menu display and scrolls through
the sub menus.
Value Up or Value Down
Selects values within the submenu.
Enter
Stores selected values or performs the
selected function.
DocuPrint NC60
The printer menus are in layers.
MENU layer consists of the following:
Parallel Menu
Job Menu
Serial Menu
Password
Ethernet Menu
Tray Menu
Novell Menu
PCL Menu
Media Server
System Menu
Print Menu
Color Adjust
Service Menu
Imaging Menu
Reset Menu
NOTE: The Password option is used to send
a print and hold it until you are at the printer to
receive it. This option is only available if the
printer has a hard drive.
NOTE: The Media Server option is only
available if the printer has the Media Server
Option and a floppy disk is inserted.
NOTE: The Reset Menu is only visible if the
On Line and Enter keys are pressed and held
at power on. The keys must be held until the
display indicates Power On Version X.XX, then
release the keys.
2/99
6-19
The TOP To see how the Menus are layered refer to the
NC60 Menu page.
To run the NC60 MENU page:
Press
Menu Up - until
Item Down - until
Enter
Display Reads
Menus
Print
Print
Menu Map
Processing . . .
Menu Map
GENERAL PROCEDURES
MENUS