Counter Limit - Xerox DocuPrint C55 Service Manual

COUNTER LIMIT

This Diagnostic routine is used to change the
limits for the consumables.
1. Enter Special diagnostics and press the
Menu [3] key until COUNTER LIM DRUM is
displayed on the Message Display.
2. Press the Next [6]/Previous [5] keys until
the Message Display steps
consumable limit to be changed (Table 8).
3. Press the Enter [7] key the display will
indicate.
XXXX ########
XXXX is the consumable name.
######## is the current limit.
4. Press the Menu [3] key to select the digit to
be changed.
5. Press the Next [6]/Previous [5] keys to
change the limit.
6. To store the counter change insert a sheet of
paper into the bypass slot to actuate the
Bypass Switch, then press the Form Feed
[1] key. The On Line LED will switch on and
then off when the change is stored.
7. Press the Media Server [2] key to return the
COUNTER LIMIT list. Repeat steps 2
through 6 to change additional counters.
GENERAL PROCEDURES
SPECIAL DIAGNOSTICS
Consumable
(DRUM) Drum
(YDEV) Y Developer
(MDEV) M Developer
(CDEV) C Developer
to the
KDEV) K Developer
(PRNT) Prints
(FSU) Fuser
(YTON) Yellow Toner
(MTON) Magenta Toner
(CTON) Cyan Toner
(KTON) Black Toner
(OIL) Oil
(DRMN) Drum Notify
(YDVN) Y Developer Notify
(MDVN) M Developer Notify
(CDVN) C Developer Notify
(KDVN) K Developer Notify
Table 8 Consumable Defaults
Default Value
50,000
30,000
30,000
30,000
50,000
300,000
60,000
99999999
99999999
99999999
99999999
50
45,000
27,000
27,000
27,000
45,000
2/99
6-10 DocuPrint C55/C55mp/[NC60]