Rep 4.8 Magnetic Roller Cleaning Solenoid; Rep 4.8 - Xerox DocuPrint C55 Service Manual

REP 4.8

MAGNETIC ROLLER
CLEANING SOLENOID
PARTS LIST ON PL 4.6
REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the following:
a. Print Drum Module.
b. Color Developer Module.
c. Black Developer Module.
d. Right Side Cover (REP 1.3).
e. Top Cover (REP 1.1).
f. Rear Cover (REP 1.2).
2. Remove the Main Drive
(REP 4.2)
3. (Figure 1): Remove the Outer Drive Frame.
a. Remove the Pulley.
b. Remove the 4 Clutch Covers
c. Remove the E Rings and Screws and
then remove the Outer Drive Frame.
REPAIRS/ADJUSTMENTS
REP 4.8
Outer Drive
Frame
Motor Belts
Pulley
Figure 1. Removing the Outer Drive Frame
4. (Figure 2):
Clutch
Covers
E10
2/99
4-16
Remove the Magnetic Roller
Cleaning Solenoid.
Magnetic Roller
Cleaning Solenoid
Figure 2. Removing the Magnetic Roller
Cleaning Solenoid
DocuPrint C55/C55mp/[NC60]
E21