Rep 8.8 Paper Drive Roller - Xerox DocuPrint C55 Service Manual

REP 8.8 PAPER DRIVE ROLLER

PARTS LIST ON PL 8.2
REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the following:
a. Paper Guide (REP 8.1)
b. Paper Feed Assembly (REP 8.2).
2. (Figure 1): Remove the Waste Toner Sensor
cover and the Waste Toner Sensor.
3. Unhook the spring, slide it out the bottom,
and remove the Waste Toner Box from the
Paper Feed Assembly.
Sensor
Spring
Spring
Waste Toner
Box
Figure 1. Removing the Toner Box
REPAIRS/ADJUSTMENTS
REP 8.8
4. (Figure 2): Remove the E-Rings, Gears, and
Bearings. Remove the Paper Drive Roller.
Paper Drive
Roller
Sensor Cover Figure 2. Removing the Paper Drive Roller
and Arm
D13
REPLACEMENT
NOTE:
Box, make sure it slides back and forth smoothly.
Drive Roller
Gear
D14
2/99
4-30
When reassembling the Waste Toner
DocuPrint C55/C55mp/[NC60]