Xerox DocuPrint C55 Service Manual page 26

F1 DISK ERROR (FLOPPY) RAP
The Floppy Disk cannot be read.
INITIAL ACTION
Note: The Floppy Disk must be a DOS format.
Load a different floppy and try to read it.
If the floppy still cannot be read, check the
following for a good connection:
• CN102 between the Floppy drive and the
ESS. (BSD 13 in Section 7).
• CN103 the flat cable between the Floppy
drive and the ESS. (BSD 13 in Section 7).
If the problem still exists, replace the Floppy
Drive before replacing the ESS PWB.
STATUS INDICATOR RAPs
F1, F2, F3
F2 DISK I/O ERROR (FLOPPY) RAP
The Floppy Disk cannot be read.
INITIAL ACTION
Note: The Floppy Disk must be a DOS format.
Load a different floppy and try to read it.
If the floppy still cannot be read, check the
following for a good connection:
• CN102 between the Floppy drive and the
ESS. (BSD 13 in Section 7).
• CN103 the flat cable between the Floppy
drive and the ESS. (BSD 13 in Section 7).
If the problem still exists, replace the Floppy
Drive before replacing the ESS PWB.
2/99
2-12
F3 ACTION FAILED (FLOPPY) RAP
The Floppy Disk cannot be accessed.
INITIAL ACTION
Note: The Floppy Disk must be a DOS format.
Load a different floppy and try to read it.
If the floppy still cannot be read, check the
following for a good connection:
• CN102 between the Floppy drive and the
ESS. (BSD 13 in Section 7).
• CN103 the flat cable between the Floppy
drive and the ESS. (BSD 13 in Section 7).
If the problem still exists, replace the Floppy
Drive before replacing the ESS PWB.
DocuPrint C55/C55mp/[NC60]