Symbology - Xerox DocuPrint C55 Service Manual

SYMBOLOGY

A tag number within a circle and pointing to an
item number shows that the part has been
changed by the tag number within the circle
(Figure 1). Information on the modification is
in the Change Tag Index.
Figure 1. With Tag Symbol
DocuPrint C55/C55mp/[NC60]
A tag number within a circle having a shaded
bar and pointing to an item number shows that
the configuration of the part shown is the
configuration before the part was changed by
the tag number within the circle (Figure 2).
Figure 2. Without Tag Symbol
2/99
5-3
A tag number within a circle with no apex
shows that the entire drawing has been
changed by the tag number within the circle
(Figure 3). Information on the modification is
in the Change Tag Index.
Figure 3. Entire Drawing With Tag Symbol
A tag number within a circle with no apex and
having a shaded bar shows that the entire
drawing was the configuration before being
changed by the tag number within the circle
(Figure 4).
Figure 4. Entire Drawing Without
Tag Symbol
PARTS LIST SECTION
INTRODUCTION