GP 15.1 INSTALL
PROCEDURE
1. General Notes:
DO NOT connect the power cord to the
printer until you are instructed to do so.
The Printer weighs approximately 89
pounds (40 Kg) without consumables.
!
To avoid accidents, two people should lift
the printer into place before installing.
If
you
need
assistance
installation, call your Dealer or contact:
•
Team XRX (US) 1-800-TeamXRX
(1-800-832-6979
•
Xerox National Call Center (Canada)
1-800-939-3769
•
For all other countries please call your
local Xerox Support.
2. Prepare for installation:
a. Be sure to remove the outer box by
removing the four clips as shown.
DocuPrint C55/C55mp/[NC60]
b. Remove the packaging materials, printer,
and consumables from the carton. Make
sure that you have all the components
shown in the illustration below.
with
your
c. Place the printer where it will be used.
TWO people should lift the printer.
d. Remove the tape from the printer
exterior.
02
2/99
6-55
e. Release the latches and open the front
panel.
f.
Release the latch and open the rear
panel. Remove the foam sheet.
GENERAL PROCEDURES
GP 15.1 INSTALL
03
04