Adj 3.2.2 Margins (Side-To-Side And Top-To-Bottom) [Nc60] - Xerox DocuPrint C55 Service Manual

ADJ 3.2.2 MARGINS (SIDE-TO-SIDE
and TOP-TO-BOTTOM)
[NC60]
PURPOSE:
To adjust the top and left margins (with
respect to a portrait page) using the Control
Panel.
CHECK:
1. Run a print of Test Pattern A.
a. Press Menu Up until Service is
displayed.
b. Press Item Down until Test Patterns is
displayed.
c. Press Value Up until Pattern A is
displayed, press Enter.
2. Figure 1: Measure the Margins.
a. The distance from the Lead Edge of the
copy paper to the 8 mm line should be
8 mm.
b. The distance from the Side Edge of the
copy paper to the 8 mm line should be
8 mm.
DocuPrint [NC60]
Lead Edge
8 mm
Side Edge
Figure 1. Margins Measurement
2/99
4-61
ADJUSTMENT:
1. Access the adjustment menu.
a. Press Menu Up until Service is
displayed.
b. Press Item Down until Margin Left or
Margin Top is displayed.
c. Press Value Up to change the margin
value (+) increases the margin (− )
decreases the margin. The Left value
can be varied +10 to − 5 mm. The Top
value can be varied +10 to − 3. Press
Enter when the adjustment
complete.
2. Perform the CHECK.
REPAIRS/ADJUSTMENTS
ADJ 3.2.1
is