Printer Diagnostics - Xerox DocuPrint C55 Service Manual

Color laser printer (50/60 hz)
Hide thumbs Also See for DocuPrint C55:
Table of Contents

Advertisement

General Information:
Software Version: X.X.X - Current ESS Software version.
Software Part Number: XXXXXXXXX ESS PWB part number.
Engine Software Version: XX - current IOT Software version.
Serial Number XXX-XXXXXX - Printer Serial Number.
Total RAM Installed : 24 MB - Total Ram installed in Printer.
Base: 8 MB - Soldered on the ESS PWB always 8M.
J8/J9 16 MB - This is the DRAM in the upper two slots. They
must be matched and must be the larger of the SIMM' s
J10/J11 0 MB - This is the DRAM in the lower two slots.
Binary/Contone Lossy Counters - The C55 printer uses
compression and decompression to save memory. However, if
the job is very complex, lossy compression may be used. The
printer will still try to print the job however data may be lost. If this
occurs, the Lossy Counters will increment. Add more memory to
fix this problem.
Humidity/Temperature counts - These readings are used to adjust
the copy quality to the environment.
extreme (0 or 255) the Temperature/Humidity sensor is not
working properly.
Fuser Temp: - This count represents fuser temperature.
following values are normal:
Transparencies 160
Warm-up
150
Paper
140
Consumables Usage - These readings track the prints and
images used by the various consumables. These readings will be
reset to zero when a new consumable is installed.
Adjustments - These readings are stored in the ESS. If the ESS
is replaced, these values will need to be re-entered.
DocuPrint C55/C55mp
If these readings are
The
2/99
3-23
Xerox
DocuPrint C55mp
Color Laser Printer

Printer Diagnostics

Process Control Status
Black: Okay
Cyan: Okay
Magenta: Okay
Yellow: Okay
Calibration: Okay
Density Rate Setpoints
Black: 90
Cyan: 90
Magenta: 90
Yellow: 90
Toner Concentration
Setpoint
Black: 91
Cyan: 94
Magenta: 102
Yellow: 96
Control Point
Black: 89
Cyan: 94
Magenta: 100
Yellow: 88
Value
Black: 92
Cyan: 94
Magenta: 102
Yellow: 84
Process Voltage
Transfer Bias
Paper 1400 Volts
OHP 2200 Volts
Developer Bias
Black: 357 Volts
Cyan: 364 Volts
Magenta: 421 Volts
Yellow: 374 Volts
The DOCUMENT COMPANY
Visit our web site at http://xerox.networkprinters.com/products/c55
General Information
Software Version: x.x.x
Software Part Number:xxxxxxxx
Engine software Version: xx
Serial Number: xxx xxx xxx
Total Ram Installed: 24
Base: 8 Mb
J8/J9: 16 Mb
J10/J11: 0 Mb
Total Pages
Binary Lossy Counter: 0 Prints
Contone Lossy Counter: 0 Prints
Relative Humidity: 20 Counts
Temperature: 107° Counts
Fuser Temperature: 157° Counts
Consumable Usage Status
Fuser: xxx Prints
Print Drum: 939 Images
Fuser Oil: Okay
Black Developer: xxx Images
Color Developers
Cyan: xx Images
Magenta: xx Images
Yellow: xx Images
Print Counts
Total Pages: xxxxx
Black: xxxxx
Cyan: xxxxx
Magenta: xxxxx
Yellow: xxxxx
Adjustments
Top Margin: +0mm
Left Margin: +0mm
Cleaning Cycle: Never
TC Patch Control: Yes
IMAGE QUALITY SPECIFICATIONS
TEST PATTERNS

Advertisement

Table of Contents
loading

This manual is also suitable for:

Docuprint c55mpNc60

Table of Contents