Rep 4.1 Main Drive Motor - Xerox DocuPrint C55 Service Manual

REP 4.1 MAIN DRIVE MOTOR
PARTS LIST ON PL 4.1
REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the following:
a. Right Side Cover (REP 1.3).
b. Top Cover (REP 1.1).
c. Rear Cover (REP 1.2).
2. (Figure 1): Remove the two screws and the
E-ring and remove the Harness Cover.
Harness
Cover
Figure 1. Removing the Harness Cover
REPAIRS/ADJUSTMENTS
REP 4.1
3. (Figure 2): Loosen the Idler, if required.
4. Disconnect CN112 and remove from the
harness.
5. Remove the screws and remove the Main
Drive Motor Assembly.
Main Drive
Motor Assembly
T01
Figure 2. Removing the Main Drive
Motor Assembly
6. (Figure 3): Remove the Main Drive Motor
Idler
Figure 3. Removing the Main Drive Motor
E8
2/99
4-8
and Motor Spacers.
Spacer
Main Drive
Motor
DocuPrint C55/C55mp/[NC60]
E19