Gp 1 Print Drum Removal; Gp 2 Color Developer Removal - Xerox DocuPrint C55 Service Manual

GP 1 PRINT DRUM REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. (Figure 1): Grasp the two latches and open
the Transfer Assembly.
Transfer
Assembly
Figure 1. Opening the Transfer Assembly
2. (Figure 2): Release the latch and open the
ROS.
ROS
Figure 2. Opening the ROS
DocuPrint C55/C55mp/[NC60]
3. (Figure 3): Release the two green latches
and slide the Print Drum module out of the
printer.
Latches
Figure 3. Print Drum Removal
C7
C8
GP 2
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the Print Drum (GP 1).
2. (Figure 1): Grasp the two handles, lift and
C2
2/99
6-41
COLOR DEVELOPER
REMOVAL
WARNING
remove the Color Developer module.
Figure 1. Color Developer Removal
GENERAL PROCEDURES
GP 1, GP 2
C10