Rep 4.2 Main Drive Motor Belts - Xerox DocuPrint C55 Service Manual

REP 4.2 MAIN DRIVE MOTOR
BELTS
PARTS LIST ON PL 4.4
REMOVAL
WARNING
Switch the Main Power off and disconnect the
Power Cord.
1. Remove the following:
a. Right Side Cover (REP 1.3).
b. Top Cover (REP 1.1).
c. Rear Cover (REP 1.2).
2. (Figure 1): Loosen the Idler, if required.
3. Disconnect CN112 and remove from the
harness.
4. Remove the screws and remove the Main
Drive Motor Assembly.
DocuPrint C55/C55mp/[NC60]
Idler
Main Drive
Motor Assembly
Figure 1. Removing the Main Drive
Motor Assembly
2/99
4-9
5. (Figure 2): Remove the Main Drive Motor
Belts.
Figure 2. Removing the Main Drive Belts
E8
REPAIRS/ADJUSTMENTS
Belt A
Belt B
E9
REP 4.2