Creating A Vlan - ZyXEL Communications XGS-4728F User Manual

Chapter 6 Tutorials
DHCP client A based on the system name, VLAN ID and port number in the DHCP
request. Client A connects to the Switch's port 2 in VLAN 102.
Figure 31 Tutorial: DHCP Relay Scenario
DHCP Server
192.168.2.3

6.2.2 Creating a VLAN

Follow the steps below to configure port 2 as a member of VLAN 102.
Access the web configurator through the Switch's management port.
1
Go to Basic Setting > Switch Setup and set the VLAN type to 802.1Q. Click
2
Apply to save the settings to the run-time memory.
Figure 32 Tutorial: Set VLAN Type to 802.1Q
Click Advanced Application > VLAN > Static VLAN.
3
66
Port 2
PVID=102
A
172.16.1.18
VLAN 102
XGS-4728F User's Guide