ZyXEL Communications XGS-4728F User Manual page 101

static VLAN, click Static VLAN in the VLAN Status screen to display the screen
as shown next.
Figure 48 Advanced Application > VLAN > Static VLAN
The following table describes the related labels in this screen.
Table 17 Advanced Application > VLAN > Static VLAN
LABEL
ACTIVE
Name
VLAN Group
ID
Port
*
XGS-4728F User's Guide
DESCRIPTION
Select this check box to activate the VLAN settings.
Enter a descriptive name for the VLAN group for identification purposes.
This name consists of up to 64 printable characters; spaces are allowed.
Enter the VLAN ID for this static entry; the valid range is between 1 and
4094.
The port number identifies the port you are configuring.
Settings in this row apply to all ports.
Use this row only if you want to make some settings the same for all
ports. Use this row first to set the common settings and then make
adjustments on a port-by-port basis.
Note: Changes in this row are copied to all the ports as soon as you
make them.
Chapter 9 VLAN
101