Link Aggregation Status - ZyXEL Communications XGS-4728F User Manual
Intelligent layer 3+ switch
Hide thumbs
Also See for XGS-4728F:
- User manual (426 pages) ,
- Specifications (2 pages) ,
- Manual (8 pages)
Table of Contents
Advertisement
17.3 Link Aggregation Status
Click Advanced Application > Link Aggregation in the navigation panel. The
Link Aggregation Status screen displays by default. See
153
for more information.
Figure 79 Advanced Application > Link Aggregation Status
The following table describes the labels in this screen.
Table 39 Advanced Application > Link Aggregation Status
LABEL
Group ID
Enabled Port
Synchronized
Ports
Aggregator
ID
XGS-4728F User's Guide
DESCRIPTION
This field displays the group ID to identify a trunk group, that is, one
logical link containing multiple ports.
These are the ports you have configured in the Link Aggregation screen
to be in the trunk group.
The port number(s) displays only when this trunk group is activated and
there is a port belonging to this group.
These are the ports that are currently transmitting data as one logical link
in this trunk group.
Link Aggregator ID consists of the following: system priority, MAC
address, key, port priority and port number. Refer to
page 154
for more information on this field.
The ID displays only when there is a port belonging to this trunk group
and LACP is also enabled for this group.
Chapter 17 Link Aggregation
Section 17.1 on page
Section 17.2.1 on
155
Advertisement
Table of Contents
Troubleshooting
