Gui-Based Ftp Clients; Ftp Restrictions - ZyXEL Communications XGS-4728F User Manual

Use put to transfer files from the computer to the Switch, for example, put
6
firmware.bin ras transfers the firmware on your computer (firmware.bin) to the
Switch and renames it to "ras". Similarly, put config.cfg config transfers the
configuration file on your computer (config.cfg) to the Switch and renames it to
"config". Likewise get config config.cfg transfers the configuration file on the
Switch to your computer and renames it to "config.cfg". See
334 for more information on filename conventions.
Enter quit to exit the ftp prompt.
7

39.8.3 GUI-based FTP Clients

The following table describes some of the commands that you may see in GUI-
based FTP clients.
Table 121 General Commands for GUI-based FTP Clients
COMMAND
Host Address
Login Type
Transfer Type
Initial Remote
Directory
Initial Local
Directory

39.8.4 FTP Restrictions

FTP will not work when:
• FTP service is disabled in the Service Access Control screen.
• The IP address(es) in the Remote Management screen does not match the
client IP address. If it does not match, the Switch will disconnect the FTP session
immediately.
XGS-4728F User's Guide
DESCRIPTION
Enter the address of the host server.
Anonymous.
This is when a user I.D. and password is automatically supplied to
the server for anonymous access. Anonymous logins will work only
if your ISP or service administrator has enabled this option.
Normal.
The server requires a unique User ID and Password to login.
Transfer files in either ASCII (plain text format) or in binary mode.
Configuration and firmware files should be transferred in binary
mode.
Specify the default remote directory (path).
Specify the default local directory (path).
Chapter 39 Maintenance
Table 120 on page
335