Arp Inspection Log Status - ZyXEL Communications XGS-4728F User Manual

Chapter 26 IP Source Guard
Table 81 ARP Inspection VLAN Status
LABEL
VID
Received
Request
Reply
Forwarded
Dropped

26.6.2 ARP Inspection Log Status

Use this screen to look at log messages that were generated by ARP packets and
that have not been sent to the syslog server yet. To open this screen, click
Advanced Application > IP Source Guard > ARP Inspection > Log Status.
Figure 129 ARP Inspection Log Status
The following table describes the labels in this screen.
Table 82 ARP Inspection Log Status
LABEL
Clearing log status
table
Total number of logs
Index
Port
VID
Sender Mac
248
DESCRIPTION
This field displays the VLAN ID of each VLAN in the range specified
above.
This field displays the total number of ARP packets received from
the VLAN since the Switch last restarted.
This field displays the total number of ARP Request packets
received from the VLAN since the Switch last restarted.
This field displays the total number of ARP Reply packets received
from the VLAN since the Switch last restarted.
This field displays the total number of ARP packets the Switch
forwarded for the VLAN since the Switch last restarted.
This field displays the total number of ARP packets the Switch
discarded for the VLAN since the Switch last restarted.
DESCRIPTION
Click Apply to remove all the log messages that were generated
by ARP packets and that have not been sent to the syslog server
yet.
This field displays the number of log messages that were
generated by ARP packets and that have not been sent to the
syslog server yet. If one or more log messages are dropped due
to unavailable buffer, there is an entry called overflow with the
current number of dropped log messages.
This field displays a sequential number for each log message.
This field displays the source port of the ARP packet.
This field displays the source VLAN ID of the ARP packet.
This field displays the source MAC address of the ARP packet.
XGS-4728F User's Guide