Arp Inspection Overview - ZyXEL Communications XGS-4728F User Manual

Chapter 26 IP Source Guard
Configure trusted and untrusted ports, and specify the maximum number of DHCP
3
packets that each port can receive per second.
Configure static bindings.
4

26.1.2 ARP Inspection Overview

Use ARP inspection to filter unauthorized ARP packets on the network. This can
prevent many kinds of man-in-the-middle attacks, such as the one in the following
example.
Figure 120 Example: Man-in-the-middle Attack
A
In this example, computer B tries to establish a connection with computer A.
Computer X is in the same broadcast domain as computer A and intercepts the
ARP request for computer A. Then, computer X does the following things:
• It pretends to be computer A and responds to computer B.
• It pretends to be computer B and sends a message to computer A.
As a result, all the communication between computer A and computer B passes
through computer X. Computer X can read and alter the information passed
between them.
26.1.2.1 ARP Inspection and MAC Address Filters
When the Switch identifies an unauthorized ARP packet, it automatically creates a
MAC address filter to block traffic from the source MAC address and source VLAN
ID of the unauthorized ARP packet. You can configure how long the MAC address
filter remains in the Switch.
These MAC address filters are different than regular MAC address filters
12 on page
• They are stored only in volatile memory.
• They do not use the same space in memory that regular MAC address filters
use.
234
X
123).
B
(Chapter
XGS-4728F User's Guide