ZyXEL Communications XGS-4728F User Manual page 147

Intelligent layer 3+ switch

Hide thumbs Also See for XGS-4728F:

Table of Contents

Table 34 Advanced Application > Bandwidth Control (continued)

XGS-4728F User's Guide

Select this check box to activate egress rate limits on this port.

Specify the maximum bandwidth allowed in kilobits per second (Kbps) for

the out-going traffic flow on a port.

Click Apply to save your changes to the Switch's run-time memory. The

Switch loses these changes if it is turned off or loses power, so use the

Save link on the top navigation panel to save your changes to the non-

volatile memory when you are done configuring.

Click Cancel to begin configuring this screen afresh.

Chapter 14 Bandwidth Control

Troubleshooting