ZyXEL Communications XGS-4728F User Manual page 116

Chapter 10 Static MAC Forward Setup
Click Advanced Applications > Static MAC Forwarding in the navigation panel
to display the configuration screen as shown.
Figure 57 Advanced Application > Static MAC Forwarding
The following table describes the labels in this screen.
Table 22 Advanced Application > Static MAC Forwarding
LABEL
Active
Name
MAC Address Enter the MAC address in valid MAC address format, that is, six
VID
Port
Add
Cancel
Clear
Index
Active
Name
MAC Address This field displays the MAC address that will be forwarded and the VLAN
VID
116
DESCRIPTION
Select this check box to activate your rule. You may temporarily deactivate
a rule without deleting it by clearing this check box.
Enter a descriptive name for identification purposes for this static MAC
address forwarding rule.
hexadecimal character pairs.
Note: Static MAC addresses do not age out.
Enter the VLAN identification number.
Enter the port where the MAC address entered in the previous field will be
automatically forwarded.
Click Add to save your rule to the Switch's run-time memory. The Switch
loses this rule if it is turned off or loses power, so use the Save link on the
top navigation panel to save your changes to the non-volatile memory
when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to reset the fields to the factory defaults.
Click an index number to modify a static MAC address rule for a port.
This field displays whether this static MAC address forwarding rule is active
(Yes) or not (No). You may temporarily deactivate a rule without deleting
it.
This field displays the descriptive name for identification purposes for this
static MAC address-forwarding rule.
identification number to which the MAC address belongs.
This field displays the ID number of the VLAN group.
XGS-4728F User's Guide