ZyXEL Communications XGS-4728F User Manual page 281

Intelligent layer 3+ switch
Hide thumbs Also See for XGS-4728F:
Table of Contents

Advertisement

Table 95 IP Application > OSPF Status (continued)
LABEL
Poll
Interval(s)
Stop
The following table describes some common output fields.
Table 96 OSPF Status: Common Output Fields
FIELD
Interface
Internet
Address
Area
Router ID
Transmit Delay
State
Priority
Designated
Router
Backup
Designated
Router
Time Intervals
Configured
Neighbor Count This field displays the number of neighbor routers.
Adjacent
Neighbor Count
Neighbor
Neighbor ID
Pri
State
Dead Time
Address
Interface
Link State Database
Link ID
ADV Router
Age
XGS-4728F User's Guide
DESCRIPTION
The text box displays how often (in seconds) this screen refreshes. You
may change the refresh interval by typing a new number in the text box
and then clicking Set Interval.
Click Stop to end OSPF status polling.
DESCRIPTION
This field displays the IP address and subnet bits of an IP routing
domain.
This field displays the area ID.
This field displays the unique ID of the Switch.
This field displays the transmission delay in seconds.
This field displays the state of the Switch (backup or DR (designated
router)).
This field displays the priority of the Switch. This number is used in the
designated router election.
This field displays the router ID of the designated router.
This field displays the router ID of a backup designated router.
This field displays the time intervals (in seconds) configured.
This field displays the number of neighbor router(s) that is adjacent to
the Switch.
This field displays the router ID of the neighbor.
This field displays the priority of the neighbor. This number is used in
the designated router election.
This field displays the state of the neighbor (backup or DR (designated
router)).
This field displays the dead time in seconds.
This field displays the IP address of a neighbor.
This field displays the MAC address of a device.
This field displays the ID of a router or subnet.
This field displays the IP address of the layer-3 device that sends the
LSAs.
This field displays the time (in seconds) since the last LSA was sent.
Chapter 33 OSPF
281

Advertisement

Table of Contents
loading

Table of Contents