Hardware Installation And Connection; Freestanding Installation - ZyXEL Communications XGS-4728F User Manual

C
H A P T E R
Hardware Installation and
This chapter shows you how to install and connect the Switch.

2.1 Freestanding Installation

Make sure the Switch is clean and dry.
1
Set the Switch on a smooth, level surface strong enough to support the weight of
2
the Switch and the connected cables. Make sure there is a power outlet nearby.
Make sure there is enough clearance around the Switch to allow air circulation and
3
the attachment of cables and the power cord.
Remove the adhesive backing from the rubber feet.
4
Attach the rubber feet to each corner on the bottom of the Switch. These rubber
5
feet help protect the Switch from shock or vibration and ensure space between
devices when stacking.
Figure 5 Attaching Rubber Feet
XGS-4728F User's Guide
2
Connection
31