ZyXEL Communications XGS-4728F User Manual page 63

Go to Advanced Application > VLAN > VLAN Port Setting, and set the PVID
3
of the ports 5, 6 and 7 to 100. This tags untagged incoming frames on ports 5, 6
and 7 with the tag 100.
Figure 26 Tutorial: Tag Untagged Frames
Go to Advanced Application > IP Source Guard > DHCP snooping >
4
Configure, activate and specify VLAN 100 as the DHCP VLAN as shown. Click
Apply.
Figure 27
Click the Port link at the top right corner.
5
XGS-4728F User's Guide
Tutorial: Specify DHCP VLAN
Chapter 6 Tutorials
63