Link Aggregation Setting - ZyXEL Communications XGS-4728F User Manual

17.4 Link Aggregation Setting

Click Advanced Application > Link Aggregation > Link Aggregation Setting
to display the screen shown next. See
information on link aggregation.
Figure 80 Advanced Application > Link Aggregation > Link Aggregation Setting
The following table describes the labels in this screen.
Table 40 Advanced Application > Link Aggregation > Link Aggregation Setting
LABEL
Link
Aggregation
Setting
Group ID
Active
XGS-4728F User's Guide
DESCRIPTION
This is the only screen you need to configure to enable static link
aggregation.
The field identifies the link aggregation group, that is, one logical link
containing multiple ports.
Select this option to activate a trunk group.
Chapter 17 Link Aggregation
Section 17.1 on page 153 for more
157