Transceiver Installation; Transceiver Removal - ZyXEL Communications XGS-4728F User Manual

3.1.3.1 Transceiver Installation

Use the following steps to install a mini GBIC transceiver (SFP or XFP module).
Insert the transceiver into the slot with the exposed section of PCB board facing
1
down.
Figure 9 Transceiver Installation Example
Press the transceiver firmly until it clicks into place.
2
The Switch automatically detects the installed transceiver. Check the LEDs to
3
verify that it is functioning properly.
Figure 10 Installed Transceiver

3.1.3.2 Transceiver Removal

Use the following steps to remove a mini GBIC transceiver (SFP module).
Open the transceiver's latch (latch styles vary).
1
Figure 11 Opening the Transceiver's Latch Example
XGS-4728F User's Guide
Chapter 3 Hardware Overview
37