ZyXEL Communications XGS-4728F User Manual page 87

Switch in a routing domain, simply add a new routing domain entry with a
different IP address in the same subnet.
Figure 42 Basic Setting > IP Setup
The following table describes the labels in this screen.
Table 12 Basic Setting > IP Setup
LABEL
Default
Gateway
Domain
Name Server
Default
Management
Management IP Address
Use these fields to set the settings for the out-of-band management port.
XGS-4728F User's Guide
DESCRIPTION
Type the IP address of the default outgoing gateway in dotted decimal
notation, for example 192.168.1.254.
DNS (Domain Name System) is for mapping a domain name to its
corresponding IP address and vice versa. Enter a domain name server IP
address in order to be able to use a domain name instead of an IP address.
Specify which traffic flow (In-Band or Out-of-band) the Switch is to send
packets originating from itself (such as SNMP traps) or packets with
unknown source.
Select Out-of-band to have the Switch send the packets to the
management port labelled MGMT. This means that device(s) connected to
the other port(s) do not receive these packets.
Select In-Band to have the Switch send the packets to all ports except the
management port (labelled MGMT) to which connected device(s) do not
receive these packets.
Chapter 8 Basic Setting
87