ZyXEL Communications XGS-4728F User Manual page 108

Chapter 9 VLAN
The following table describes the labels in this screen.
Table 20 Advanced Application > VLAN > VLAN Port Setting > Protocol Based
VLAN Setup
LABEL
Active
Port
Name
Ethernet-
type
VID
Priority
Add
Cancel
Index
Active
Port
Name
Ethernet-
type
VID
Priority
Delete
Cancel
108
DESCRIPTION
Check this box to activate this protocol based VLAN.
Type a port number to be included in this protocol based VLAN.
This port must belong to a static VLAN in order to participate in a protocol
based VLAN. See Chapter 9 on page 95
VLANs.
Enter up to 32 alphanumeric characters to identify this protocol based
VLAN.
Use the drop down list box to select a predefined protocol to be included in
this protocol based VLAN or select Others and type the protocol number in
hexadecimal notation. For example, the IP protocol in hexadecimal
notation is 0800, and Novell IPX protocol is 8137.
Note: Protocols in the hexadecimal number range of 0x0000 to 0x05ff
are not allowed to be used for protocol based VLANs.
Enter the ID of a VLAN to which the port belongs. This must be an existing
VLAN which you defined in the Advanced Applications > VLAN screens.
Select the priority level that the Switch will assign to frames belonging to
this VLAN.
Click Add to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
This is the index number identifying this protocol based VLAN. Click on any
of these numbers to edit an existing protocol based VLAN.
This field shows whether the protocol based VLAN is active or not.
This field shows which port belongs to this protocol based VLAN.
This field shows the name the protocol based VLAN.
This field shows which Ethernet protocol is part of this protocol based
VLAN.
This field shows the VLAN ID of the port.
This field shows the priority which is assigned to frames belonging to this
protocol based VLAN.
Click this to delete the protocol based VLANs which you marked for
deletion.
Click Cancel to begin configuring this screen afresh.
for more details on setting up
XGS-4728F User's Guide