Chapter 3 Hardware Overview
Pull the transceiver out of the slot.
2
Figure 12 Transceiver Removal Example
3.2 Rear Panel
The following figures show the rear panels of the AC and DC power input model
switches. The rear panels contain:
• A connector for the backup power supply (A)
• An optional slot (B) for installing an EM-422 or EM-412 uplink module
• Two stacking ports (C)
• An RJ-45 out-of-band management port (D)
• An RS-232 management console port (E)
• A connector for the power receptacle (F)
• A power switch (G) (DC power input model only).
Figure 13 Rear Panel - AC Model
A
Figure 14 Rear Panel - DC Model
38
B
C
D
E
XGS-4728F User's Guide
F
F
G