ZyXEL Communications XGS-4728F User Manual page 290

Chapter 33 OSPF
Table 102 IP Application > OSPF Configuration > OSPF Virtual Link (continued)
LABEL
Key
Add
Cancel
Clear
Index
Name
Peer Router
ID
Authenticatio
n
Key ID
Delete
Cancel
290
DESCRIPTION
When you select Simple in the Authentication field, enter a password
eight-character long.
When you select MD5 in the Authentication field, enter a password 16-
character long.
Click Add to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
Click Clear to set the above fields back to the factory defaults.
This field displays an index number of an entry.
This field displays a descriptive name of a virtual link.
This field displays the ID (that uses the format of an IP address in dotted
decimal notation) of a peer border router.
This field displays the authentication method used (Same-as-Area,
None, Simple or MD5).
When the Authentication field displays MD5, this field displays the
identification number of the key used.
Click Delete to remove the selected entry from the summary table.
Click Cancel to clear the Delete check boxes.
XGS-4728F User's Guide