Enabling Vlan Mapping - ZyXEL Communications XGS-4728F User Manual

Chapter 28 VLAN Mapping

28.2 Enabling VLAN Mapping

Click Advanced Application and then VLAN Mapping in the navigation panel to
display the screen as shown.
Figure 139 VLAN Mapping
The following table describes the labels in this screen.
Table 87 VLAN Mapping
LABEL
Active
Port
*
Active
Apply
Cancel
260
DESCRIPTION
Select this option to enable VLAN mapping on the Switch.
This field displays the port number.
Use this row to make the setting the same for all ports. Use this row first
and then make adjustments on a port-by-port basis.
Changes in this row are copied to all the ports as soon as you make them.
Select this check box to enable the VLAN mapping feature on this port.
Clear this check box to disable the VLAN mapping feature.
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to begin configuring this screen afresh.
XGS-4728F User's Guide