ZyXEL Communications XGS-4728F User Manual page 88

Chapter 8 Basic Setting
Table 12 Basic Setting > IP Setup (continued)
LABEL
IP
Address
IP Subnet
Mask
Default
Gateway
Apply
Cancel
IP Interface
Use these fields to create or edit IP routing domains on the Switch.
IP
Address
IP Subnet
Mask
VID
Add
Cancel
Index
IP Address
IP Subnet
Mask
VID
Delete
Cancel
88
DESCRIPTION
Enter the out-of-band management IP address of your Switch in dotted
decimal notation. For example, 192.168.0.1.
Enter the IP subnet mask of your Switch in dotted decimal notation, for
example, 255.255.255.0.
Enter the IP address of the default outgoing gateway in dotted decimal
notation, for example, 192.168.0.254
Click Apply to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
Enter the IP address of your Switch in dotted decimal notation, for
example, 192.168.1.1. This is the IP address of the Switch in an IP routing
domain.
Enter the IP subnet mask of an IP routing domain in dotted decimal
notation, for example, 255.255.255.0.
Enter the VLAN identification number to which an IP routing domain
belongs.
Click Add to save your changes to the Switch's run-time memory. The
Switch loses these changes if it is turned off or loses power, so use the
Save link on the top navigation panel to save your changes to the non-
volatile memory when you are done configuring.
Click Cancel to reset the fields to your previous configuration.
This field displays the index number of an entry.
This field displays IP address of the Switch in the IP domain.
This field displays the subnet mask of the Switch in the IP domain.
This field displays the VLAN identification number of the IP domain on the
Switch.
Click Delete to remove the selected entry from the summary table.
Note: Deleting all IP subnets locks you out of the Switch.
Click Cancel to clear the Delete check boxes.
XGS-4728F User's Guide