Initial Setup Example; Overview; Creating A Vlan - ZyXEL Communications MES3500 Series User Manual

This chapter shows how to set up the Switch for an example network.

5.1 Overview

The following lists the configuration steps for the initial setup:
• Create a VLAN
• Set port VLAN ID
• Configure the Switch IP management address

5.1.1 Creating a VLAN

VLANs confine broadcast frames to the VLAN group in which the port(s) belongs. You can do this
with port-based VLAN or tagged static VLAN with fixed port members.
In this example, you want to configure port 1 as a member of VLAN 2.
Figure 28 Initial Setup Network Example: VLAN
Click Advanced Application > VLAN in the navigation panel and click the Static VLAN link.
1
C

Initial Setup Example

MES3500/MGS3520 Series User's Guide
43
H A PT ER
5