ZyXEL Communications XGS-4728F User Manual page 56

Chapter 5 Initial Setup Example
new IP interface. This allows the Switch to route traffic between the RD and Sales
networks.
Figure 21 Initial Setup Network Example: IP Interface
Connect your computer to the MGMT port that is used only for management.
1
Make sure your computer is in the same subnet as the MGMT port.
Open your web browser and enter 192.168.0.1 (the default MGMT port IP
2
address) in the address bar to access the web configurator. See
page 45 for more information.
Click Basic Setting and IP Setup
3
in the navigation panel.
Configure the related fields in the
4
IP Setup screen.
For the Sales network, enter 192.168.2.1 as the IP address and 255.255.255.0 as
the subnet mask.
56
Section 4.2 on
EXAMPLE
XGS-4728F User's Guide