Rear Panel - ZyXEL Communications GS1300 Series User Manual

Note: Do NOT pull the transceiver out by force. You could damage it. If the transceiver will not
slide out, grasp the tabs on both sides of the transceiver with a slight up or down motion
and carefully slide it out of the slot. If unsuccessful, contact Zyxel Support to prevent
damage to your Switch and transceiver.
Insert the dust plug into the ports on the transceiver and the cables.
5
Figure 16 Removing the Fiber Optic Cables
Figure 17 Opening the Transceiver's Latch Example
Figure 18 Transceiver Removal Example

3.2 Rear Panel

The following figures show the rear panel of the Switch. The rear panel contains:
Figure 19 Rear Panel: GS1300-10HP
Figure 20 Rear Panel: GS1300-18HP
Figure 21 Rear Panel: GS1300-26HP
Chapter 3 Hardware Panels
GS1300 Series User's Guide
22