Noise Reduction; Color Space - Christie CineIPM-2K User Manual

Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)

Noise Reduction

Noise reduction is similar to the "Filter" control, but operates in the post-sampling
digital domain with a more subtle effect. Higher settings are most useful for clearing
up noisy RGB images such as those from a PC. Adjust as desired, keeping in mind
that reducing noise (which reduces high frequencies) may also soften the image.

Color Space

"Color Space" determines how the color components of an
analog input signal (or certain digital signals) connected to
or
1, INPUT 2, INPUT 5 INPUT 6
the display. Although color space for these analog signals is
automatically determined by the Cine-IPM 2K, in some
circumstances you may wish to override this and manually set a specific color space.
NOTE: For most digital signals or for signals connected to
color space function is entirely automatic and the pull-down list disabled.
The current color space appears in the Image Settings menu. Press
different option:
•
Select
RGB
•
Select
YPbPr (Video)
•
Select
YPbPr (HDTV)
NOTE: When certain RGB signals are first connected, the Cine-IPM 2K may not
initially recognize them as RGB and will incorrectly decode their color information
as YPbPr (video). These signals can include:
•
RGB signals in NTSC, PAL, SECAM frequency ranges
•
Scan-doubled sync-on-green
•
Scan-quadrupled sync-on-green
For these signals, change the Color Space to RGB, then define a new channel for
future use.
Video Options
— SUBMENU
This submenu is used with video
sources only ( or
INPUT 3
ENABLE DECODER AGC:
Gain Control affects decoded video
images only. Enter a checkmark
(default) in most instances—this
activates the decoder's AGC circuit to
ensure properly bright images. Delete
the checkmark if a decoded video image exhibits strange color artifacts such as
stripes in highly saturated colors, indicating an incompatibility between this source
and the AGC.
are decoded for accurate color in
unless you are using component video at
with a standard definition televised signal (SDTV)
with a high definition televised signal (HDTV).
).
4
1. Enable Decoder AGC
2.
Automatic
3.
4.
5.
6. Decoder Luma Delay
INPUT
or
INPUT 3 INPUT 4
Enter
INPUT 1, 2, 5
Video Options
Video Standard
A Auto
Input Video Black
0 IRE
50.0
Color
50.0
Tint
35
OPERATION
, the
to select a
or
6.
3-25