Christie CineIPM-2K User Manual page 45

Size and Position Menu
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)
time, and you can still modify the adjustments as desired using menu options
described below.
In the Size and Position
menu, you can increase or
decrease the size of your non-
cinema image, change its
proportion (aspect ratio),
move the image to a specific
area of the screen, and refine
other related parameters. Use
Size and Position controls to
match the image precisely to
the screen used at the site.
Refer to "Using Slidebars
and Other Controls" (earlier in this section) if you need help using any of the options
and controls. Changes made in the Size and Position menu are applied immediately
and are saved when you exit the menu (press
Resize Presets
Select a Resize Presets option
to output Cine-IPM 2K data in
its native resolution or so that
it closely fills the projector's
native resolution of 2048 x
1080, or to optimize the width
or height of your display. Size,
Position and Blanking
parameters will automatically
adjust accordingly. Or, if
Blanking is set first, which
defines an Active Input Area, Resize Preset scaling will occur in this region of
interest only. Resizing options are explained in detail below.
WHAT IS THE RESIZING DEFAULT?
source, the output will automatically resize to fill the 2048 x 1080 resolution of the
CP2000. For sources having a more "square" aspect ratio than that of the CP2000,
this means the image will appear horizontally stretched until you select a different
Resizing Presets option or output resolution. See Select "Default" below.
WHEN "CUSTOM" APPEARS:
in the Size and Position menu when any of the values for Size, Vertical Stretch, H-
Position, V-Position or Blanking do not correspond to those for a preset. This option
is not offered in the Resize Presets pull-down list.
• Select
for most sources (factory default). The image will be centered
"DEFAULT"
and displayed as large as possible depending on the type of source, as described
below:
A graphic image will enlarge to fill the screen height, and be centered
between black side bars.
or
Exit
By default when displaying a new Cine-IPM 2K
The "Custom" re-size descriptor automatically appears
OPERATION
).
Menu
3-19