Christie CineIPM-2K User Manual page 42

OPERATION
Copying or
Deleting Channels
3-16
Table 3.2. Abbreviations for Signal Type
Abbrev.
4WH
4WV
SG
5W
5WR
SVid
CVid
Dig
FUNCTIONS WITHIN THE CHANNEL SETUP MENU —
highlight the desired channel in the Channel Setup menu and do one of two things:
•
Press if you want to copy the selected channel or delete this or other
Func
channels. See Copying or Deleting a Channel below.
•
Press if you want to edit channel setups (i.e., non-image related
Enter
parameters) for the selected channel. See Editing a Channel Setup,
below.
, highlight the desired channel in the Channel Setup menu, then
TO COPY A CHANNEL
press to go to the Channel Copy/Delete submenu. Select "Copy" and
Func
press —a new channel will be created. It is identical to original, which still
Enter
remains, but it is identified with the next available number from 01-99. If you change
your mind and do not want to copy the current channel, press
return to the previous menu. Copying channels is a quick method for creating
numerous channels, each of which can then be edited and adjusted for a variety of
presentations in the future.
TO DELETE A CHANNEL
then press to activate the Channel Copy/Delete submenu. Select "Delete" and
Func
press —a confirmation window will appear to make sure that you really want to
Enter
delete this channel.
Signal Type
Composite (4 wire) on HC input
Composite (4 wire) on V input
Sync-on-green
Separate H,V
Separate H,V swapped
S-Vid
Composite Video
Digital
Figure 3.9. Copying A Channel
, highlight the desired channel in the Channel Setup menu,
To copy, delete or edit a channel,
to cancel and
Exit
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)