Christie CineIPM-2K User Manual page 65

System Configuration
— GEOMETRY and COLOR —
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)
NOTE: See 2.7, Converting the Keypad for information about changing your keypad
from IR to wired, or vice versa.
Wired Keypad
This option determines whether or not the wired keypad on the Cine-IPM 2K
responds to signals arriving at the "
To disable this option, you must use an IR remote keypad to select the "Wired
Keypad" setting. This safeguard prevents accidentally disabling a keypad during
OFF
use. When off, the Cine-IPM 2K will no longer respond to a wired keypad connected
at the front panel.
In the Configuration menu,
select the Geometry and Color
submenu when you need to
modify general color
performance and/or image
geometry for all sources.
Test Pattern
Choose the desired internal test
pattern to display, or select OFF
to turn off a test pattern. Alternatively, use the
patterns.
Keystone
NOTE: If the optional ChristieTWIST module is installed, this option is Keystone
and Warping, and activates a submenu for defining custom image shapes. Please
refer to the documentation included with your ChristieTWIST module.
Use to correct a keystoned image in which both sides of your image are inclined
toward each other. Keystone is typically caused by tipping the projector in relation to
the screen, so that the lens surface and screen are no longer parallel to each other.
Brightness Uniformity —
Brightness Uniformity creates an exceptionally smooth image in which no area
appears brighter and/or more red, green or blue than another. It is typically used to
further refine multiple displays already matched for their primary colors and overall
light output, but this feature can also smooth out a single image. In the Brightness
Uniformity menu, enable the "Uniformity Enable" checkbox to access a multitude of
adjustments for critical color light output control in specific areas throughout the
image. Your settings apply as long as the "Uniformity Enable" checkbox is enabled
and you are using a "User" color temperature defined by the Brightness Uniformity
controls. To disable the Brightness Uniformity function, delete the "Uniformity
Enable" checkmark.
NOTES: 1) See also 3.11, Using Multiple Cine-IPM 2Ks for the complete step-by-
step procedure for achieving uniform brightness. 2) If ChristieTWIST is installed, the
" port on the Cine-IPM 2K front panel.
REMOTE
Test
Figure 3.17. Keystone Adjustment
SUBMENU
OPERATION
key for cycling through test
3-39