Installation - Christie CineIPM-2K User Manual

This section explains how to install, connect, and get the Cine-IPM 2K up and running. For operating details, refer to
Section 3.
2.1

Installation

Step 1
Step 2
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)
Installation & Setup
Follow these steps for a quick install of the Cine-IPM 2K in the rear of the CP2000
pedestal.
Qualified service technician required.
1. Unlock and open the
CP2000 pedestal doors.
2. Remove the 2 rack
protector posts from the
CP2000 pedestal rear.
Screws are accessed from
within the pedestal.
See right.
3. Remove 3 security slats to
create a 3RU opening for the Cine-IPM 2K.
Install Cine-IPM 2K
1.
POSITION EARS AS
To recess
DESIRED:
the Cine-IPM 2K so
that its front source
connections route
through the
pedestal and out the
front toe, move the
Cine-IPM 2K
mounting ears to
their forward
position (see Figure
WARNING
Figure 2.1. Remove Rack Protector Posts (2)
Figure 2.2. To Recess the Cine-IPM 2K
S e c t i o n 2
2-1