Christie CineIPM-2K User Manual page 43

Editing a Channel Setup
CHANNEL EDIT — STEP 1
CHANNEL EDIT — STEP 2
CHANNEL EDIT — STEP 3
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)
TO DELETE MULTIPLE CHANNELS
and press to go to the Channel Copy/Delete submenu. Select "Delete Unlocked
Func
Only" and press to delete all unlocked channels. Or select "Delete All
Enter
Channels" to delete all channels, even those that are locked. In either case, the current
channel will remain but will be redefined from Cine-IPM 2K defaults.
NOTE: For any deletion, a confirmation box appears to make sure that you really
want to delete. Select "Cancel" (default) if you don't want to delete after all.
The basic setups that describe how and where a channel can be accessed are listed in
the Channel Setup menu. These channel setups can be edited at any time in the
Channel Edit submenu.
From the presentation level press
Channel Setup menu, press
and press . The Channel Setup menu will appear.
Enter
To edit parameters shown in the Channel Setup menu, select the relevant channel and
press . The Channel Edit menu will appear similar to the sample shown in Figure
Enter
3.11.
Figure 3.11. Channel Edit Menu (
If desired, review and/or edit the following channel setups in the Channel Edit menu:
•
CHANNEL NAME:
here. Channel names can be up to 12 characters in length.
•
CHANNEL NUMBER:
NOTES: 1) If you enter a channel number that already exists, a dialog
Figure 3.10. Deleting a Channel
, highlight any channel in the Channel Setup menu
to display the main menu. To display the
Menu
, or move the highlight to the Channel Setup option
An alpha-numeric label can be defined and/or changed
A 2-digit channel number can be changed here.
OPERATION
)
SAMPLE
3-17