Christie CineIPM-2K User Manual page 62

OPERATION
Figure 3.16. Using the "Network Routing" Option
Messages to and from any serial port will also be relayed
RS232 AND RS422 JOINED:
to all other serial ports. Use when there is only one physical link between any two
projectors, but which might be RS232 or RS422.
Messages to and from the RS232 ports will also be
RS232 AND ETHERNET JOINED:
relayed to the Ethernet port, and vice versa. Any RS422 communications will be
isolated.
All messages reach all ports, regardless of type.
ALL JOINED:
Ethernet Settings
(SUBMENU)
NOTES: 1) Not used for stand-alone Cine-IPM 2Ks. 2) Recommended for network
administrators only.
Enable this checkbox if you want a DHCP server to automatically set the
DHCP:
Cine-IPM 2K 's IP address to one that is valid and unique for use on the current
Ethernet network. On networks without a DHCP server, or to simply override the
automatic DHCP server function, delete the checkmark and enter the new "IP
Address" settings desired.
Enter a valid and unique IP address for use on the network to which the
IP ADDRESS:
Cine-IPM 2K is currently connected. This address will overwrite any previous IP
address such as the Cine-IPM 2K's factory-defined default (0.0.0.0), or one that has
been assigned by a DHCP server or other user. An IP address entered here is
3-36 Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)