Christie CineIPM-2K User Manual page 49

Image Settings Menu
Cine-IPM 2K User's Manual
020-100164-01 Rev. 1 (01/08)
PLUG & DISPLAY (EDID):
(EDID) source outputs a signal according to the EDID
information provided by the Cine-IPM 2K. To
override this information and display in a different
format (for example, if your Plug & Play [EDID]
device does not support the projector's resolution
and/or frequency), select the desired Plug & Play
(EDID) resolution from the list.
Any daisy-chained Cine-IPM 2Ks will also display
according to the chosen Plug & Play (EDID) format.
EDID = Extended Display Identification Data standard.
∋
Use options in the Image
Settings menu to alter your
non-cinema image without
affecting its size or position.
Changes made to the Image
Settings menu are applied
immediately and are saved
when you exit the menu
(press or ). Options
Exit Menu
not available for the Cine-
IPM 2K or source are
disabled and appear dim
(grey).
Contrast
( Press
SHORT CUT:
"Contrast" increases or decreases the perceived difference between light and dark
areas of your image (0-100). For best results, keep close to 50. If contrast is set too
high, the light parts of the image lose detail and clarity. If set too low, the light areas
will not be as bright as they could be and the overall image will be dim. For best
results, start with a low value and increase so that whites remain bright but are not
distorted or tinted, and that light areas do not become white (i.e., are "crushed").
Figure 3.12. Blanking of a PIP Image
By default, a Plug & Play
and adjust the slidebar.)
Contrast
OPERATION
3-23